Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
- 3. Maintenance service
   + 3.1. Maintenance service of cars with petrol engines
   - 3.2. Maintenance service of cars with diesel engines
      3.2.1. Operational materials and liquids
      3.2.2. Refuelling capacities
      - 3.2.3. Periodicity of service
         + 3.2.3.1. Each 400 km
         + 3.2.3.2. Each 7 500 km
         - 3.2.3.3. Each 15 000 km or 12 months
            3.2.3.3.1. Check and adjustment of turns of idling
            3.2.3.3.2. Check and adjustment of limiting turns of the engine
            3.2.3.3.3. Replacement of a fuel filtering element
            3.2.3.3.4. Check подтеканий liquids
            3.2.3.3.5. Replacement of a filtering element of the air filter (diesel engines 16D, 16DA)
            3.2.3.3.6. Check drivers belts (diesel engines 16D and 16DA)
            3.2.3.3.7. Check of density of a cooling liquid (diesel engines 16D and 16DA)
            3.2.3.3.8. Check of a condition and a tension of a gear belt
            3.2.3.3.9. Replacement of candles накаливания
            3.2.3.3.10. Replacement of a cooling liquid
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





3.2.3.3.3. Replacement of a fuel filtering element DIESEL ENGINES 16D AND 16DA

PERFORMANCE ORDER
1. Carefully clear filtering element and the top branch pipe of the filter, special attention giving to a place of their socket.
2. Merge from the filter fuel, having turned on ventilating заглушку and a drain stopper. Put ventilating заглушку into place and tighten its demanded moment.
3. Unscrew the filter by means of a key for the oil filter. Be convinced of absence of the sealing rings which have remained under the top branch pipe.
4. Arrange an internal sealing ring () from the complete set of the new filter round the central aperture and fix обечайкой In (With – an external ring).
5. Moisten an external sealing ring with fuel, establish in the top branch pipe and tighten by hand (according to the instruction of the manufacturer). Tighten a drain stopper.
6. Start the engine and establish the accelerated turns of idling. Check up leak presence, if necessary tighten all connections.

On the main page