Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
- 3. Maintenance service
   + 3.1. Maintenance service of cars with petrol engines
   - 3.2. Maintenance service of cars with diesel engines
      3.2.1. Operational materials and liquids
      3.2.2. Refuelling capacities
      - 3.2.3. Periodicity of service
         + 3.2.3.1. Each 400 km
         + 3.2.3.2. Each 7 500 km
         - 3.2.3.3. Each 15 000 km or 12 months
            3.2.3.3.1. Check and adjustment of turns of idling
            3.2.3.3.2. Check and adjustment of limiting turns of the engine
            3.2.3.3.3. Replacement of a fuel filtering element
            3.2.3.3.4. Check подтеканий liquids
            3.2.3.3.5. Replacement of a filtering element of the air filter (diesel engines 16D, 16DA)
            3.2.3.3.6. Check drivers belts (diesel engines 16D and 16DA)
            3.2.3.3.7. Check of density of a cooling liquid (diesel engines 16D and 16DA)
            3.2.3.3.8. Check of a condition and a tension of a gear belt
            3.2.3.3.9. Replacement of candles накаливания
            3.2.3.3.10. Replacement of a cooling liquid
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





3.2.3.3.7. Check of density of a cooling liquid (diesel engines 16D and 16DA)
THE GENERAL DATA

For check of density of a cooling liquid it is used ареометр (is available on sale).

PERFORMANCE ORDER
1. The cooling liquid represents a mix from water (it is desirable with the low maintenance of the extraneous impurity, distilled or for example, rain) and antifreeze with anticorrosive additives, suitable for work in the engine with case details from an aluminium alloy.
2. The mix structure should correspond to a freezing point-30 to S.Pri mixture be guided by the instruction of the manufacturer.
3. At operation in a hot climate when морозустойчивость it is not necessary, in water it is necessary to add anticorrosive additives.

On the main page