Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
- 8. Ignition system
- 8.1. System of ignition with the breaker
8.1.1. A technical characteristics
8.1.2. Check of system of ignition
8.1.3. Adjustment of a backlash and the closed condition of contacts of the breaker
8.1.4. Removal and installation of contacts of the breaker
8.1.5. Check, removal and condenser installation
+ 8.1.6. The ignition distributor
+ 8.1.7. Adjustment of a corner of an advancing of ignition
8.1.8. Removal, check and installation of the coil of ignition
+ 8.2. Electronic contactless system of ignition
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
| Type |
The distributor of ignition with the contact breaker
|
| Operating procedure of cylinders |
1–3–4–2 (Number 1 from outside a pulley of a cranked shaft)
|
The ignition distributor
| Direction of rotation of a rotor |
Counter-clockwise (if to take a detached view covers)
|
| Backlash between breaker contacts |
0,4 mm
|
| Corner of the closed condition of contacts of the breaker |
47 – 53 °
|
| Advancing corner эажигания (subsection 8.1.7.2 see also) |
10 ° to ВМТ (the label of a pulley of a cranked shaft and a cover edge should be thus combined)
|
The ignition coil
| Resistance of a primary winding (approximately) |
1,2 – 1,6 Ohm
|
| Resistance of a secondary winding (approximately) |
7 clod
|
The tightening moments
| Spark plugs |
40 Nanometers
|
|
On the main page
|