Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
- 8. Ignition system
- 8.1. System of ignition with the breaker
8.1.1. A technical characteristics
8.1.2. Check of system of ignition
8.1.3. Adjustment of a backlash and the closed condition of contacts of the breaker
8.1.4. Removal and installation of contacts of the breaker
8.1.5. Check, removal and condenser installation
+ 8.1.6. The ignition distributor
+ 8.1.7. Adjustment of a corner of an advancing of ignition
8.1.8. Removal, check and installation of the coil of ignition
+ 8.2. Electronic contactless system of ignition
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
Removal and installation
| PERFORMANCE ORDER |
| 1. Remove a wire of weight from the accumulator. |
| 2. Mark and disconnect low-voltage wires from the ignition coil. |
| 3. Disconnect a high-voltage wire from the ignition coil. |
| 4. Unscrew bolts and remove the ignition coil. |
| 5. Installation is made in sequence, return to removal. |
|
Check
| PERFORMANCE ORDER |
| 1. For check of the coil of ignition it is necessary to use an ohmmeter. |
| 2. Check up integrity of a primary winding of the coil of ignition, connecting an ohmmeter to positive and negative plugs of the coil of ignition. |
| 3. Integrity of a secondary winding of the coil of ignition can be checked up, connecting an ohmmeter to the positive plug of a primary winding and to the high-voltage plug. |
| 4. Check up that there is no connection between the high-voltage plug and the case of the coil of ignition. |
|
|
On the main page
|