Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

10.4.3. Repairing of apertures from a rust or cracks

PERFORMANCE ORDER

1. Remove all paint from the damaged surface and from surrounding metal in radius approximately 2,5 sm, having taken advantage of an emery paper or the wire brush, put on a drill. 2. If they are inaccessible, this work can be made manually by means of several sheets of an emery paper. 3. Having peeled the paint, you can define degree of corrosion and solve, whether replace the whole panel or if it is possible, to repair the damaged surface. 4. New panels of a body are not too expensive, as many people think, and very often much faster to establish the new panel, than to repair the big surface damaged by a rust. 5. Remove all parts of decorative furnish from the damaged area, except for what operate as the directing initial form of the damaged body of the car, such as the headlight case, and so on. 6. Having taken advantage of scissors on metal or ножовочным a cloth, remove all damaged metal, and also any other metal on which there are rust traces. 7. A hammer bend aperture edges inside to create small dredging for a filling material. 8. A wire brush smooth out the damaged surface to remove порошкообразную a rust from a metal surface. 9. If there is an access to a back part of a rusty surface, cover with its anticorrosive paint. 10. Before definitive заделкой закупорьте in any way an aperture. 11. It can be made by means of a tin, приклепанной or screwed in in an aperture, or establish in an aperture a wire grid. 12. When the aperture will be corked, the damaged area can be filled and painted over (subsection 10.4.4) see.