Audi A3

Since 1997 of release

Repair and car operation



Audi A3
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
- Brake system
   Replacement of lobbies brake колодок
   Removal and installation of disk brake mechanisms of back wheels
   Check of a thickness of a brake disk
   Removal and installation of a brake disk/support
   Adjustment of a lay brake
   Brake liquid
   Removal of air from brake system
   Removal and installation of a brake hose
   Check of the amplifier of a brake
   Removal, installation and adjustment of the switch of a stoplight
   Removal and installation of the lever and cable of a lay brake
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Electroschemes


https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ


Removal, installation and adjustment of the switch of a stoplight

THE GENERAL DATA

The stoplight switch is on a pedal support. At influence on a pedal the switch includes a stoplight. Besides, the switch of a stoplight serves as the gauge for monitor ABS/EDS, informing it that braking has been made. Therefore its reliable work and adjustment are of great importance.

REMOVAL

PERFORMANCE ORDER
1. Uncover around feet of the driver, thus address to subsection Removal and pocket installation from outside the driver.
2. Расстыкуйте a socket of the switch of a stoplight.
3. Turn the switch of a stoplight-1 on 90 to the left and take out.

ADJUSTMENT


ATTENTION

For adjustment of its switch it is necessary to take out preliminary.


PERFORMANCE ORDER
1. Completely take out a switch rod.
2. Press a pedal of a brake a hand downwards how much it probably, insert the switch into a support of a pedal and fix, having turned on a corner 90 to the right.
3. Release a pedal. The pusher is established automatically.
4. Join a socket of the switch of a stoplight.
5. Check up by means of the assistant stoplight action. Already by insignificant pressing a pedal the stoplight should light up.
6. Establish a cover around feet of the driver.
7. Removal and installation of the lever of a lay brake
On the main page