Audi A3
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
+ Forward suspension bracket
+ Back suspension bracket
- Steering
Removal and installation of the block of a pillow of safety
Removal and steering wheel installation
Removal and installation of steering draught/tip of steering draught
Removal and installation of the pump of the hydraulic booster of a wheel
Corners of installation of forward wheels
+ Body
+ Onboard electric equipment
+ Electroschemes
|
Removal and steering wheel installation
REMOVAL
ATTENTION Before removal of the block a safety pillow necessarily accept corresponding security measures.
|
PERFORMANCE ORDER |
| 1. Remove the block of a pillow of safety, address to subsection Removal and installation of the block of a pillow of safety. |
| 2. Establish wheels directly, a steering wheel in the central position. |
| 3. Mark a paint or чертилкой steering wheel position in relation to a steering shaft. |
|
4. Disconnect a steering wheel – 1 and remove it from a steering shaft. |
| 5. Do not change position of a steering column (direct position of wheels). |
| |
|
INSTALLATION
|
PERFORMANCE ORDER |
1. Put on a steering wheel on шлицевое shaft connection so that have coincided put before marks.
ATTENTION At installation of a steering wheel steering wheels should stand directly, and the switch of signals of turn should occupy average position.
|
| 2. Fix on a carving a steering wheel. Tighten the screw with internal teeths – 2 moment 60 Н•м. If is available шестигранный the screw – 1, tighten its moment 75 Н•м. |
| 3. Establish into place the block of a pillow of safety, address to subsection Removal and installation of the block of a pillow of safety. |
| 4. Pass on the car and check up at rectilinear movement steering wheel position. Steering wheel spokes should be in horizontal position. |
| 5. If the steering wheel costs slantwise, remove it and rearrange. If necessary check up a track of forward wheels (work HUNDRED). |
| 6. Check up a sound signal and a reset of the switch of signals of turn. |
|
|
On the main page
|