Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
- Routine maintenance
   + Weekly checks
   + Car routine maintenance - petrol models
   - Car routine maintenance - diesel models
      Regular service
      Replacement of impellent oil and the oil filter
      Check of a condition of hoses, and revealing of sources of leaks
      Removal of water from the fuel filter
      Check of adjustment of coupling
      Check of level ATF
      Suspension bracket and steering drive
      Check of a condition of protective covers of power shafts
      Reading of memory of the block of self-diagnostics
      Replacement of the dust removal filter (model with К/В)
      Check of a condition of a coolant of a central air of air
      Check and adjustment of turns of idling and prevention spontaneous останова the engine
      Check of serviceability of functioning of systems of decrease in toxicity of the fulfilled gases
      Check of a condition and replacement of a belt of a drive of auxiliary units
      Greasing of the mechanism of a drive of deenergizing of coupling
      Check of serviceability of functioning and adjustment of a lay brake
      Trial runs
      Replacement of the fuel filter
      Replacement трансмиссионной liquids АТ
      Condition check колодок brake mechanisms of forward and back wheels
      Greasing of locks and loops
      Replacement of hydraulic liquid LHM and the returnable filter
      Replacement of a filtering element of an air cleaner
      Level check трансмиссионного oils (models with РКПП)
      Check of a condition of brake supports, disks and hydraulic hoses
      Replacement of a belt of drive ГРМ
      Replacement of a cooling liquid
+ Engine repair
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ Electric equipment schemes

Condition check колодок brake mechanisms of forward and back wheels

THROUGH EACH 30 000 KM (18 000 MILES) RUN

 PERFORMANCE ORDER

1. Поддомкратьте the car also establish it on props. Remove forward and back wheels.

2. The visual estimation of a residual thickness of frictional overlays колодок can be made through a special observation port in the support case. For strict check of a condition колодок they should be taken from a support and are cleared. In parallel it is necessary to make check of a condition of both parties of a brake disk and to make sure of serviceability of functioning of a support (address to the Head Brake system more in detail).

3. In summary establish to the place of a wheel and lower the car on the earth. Tighten wheel bolts with demanded effort.



On the main page