Citroen Xantia

1. Park the car on an equal horizontal platform, whenever possible with a firm covering. Level check трансмиссионного oils should be made before the trip first in a present day, or after not less than 5 minutes after engine deenergizing. If to make check сазу after a car stop, the oil part will appear distributed on surfaces of internal components of a transmission and for accuracy of measurement it will be impossible to be charged.
2. Release fixing clamps and uncover access with локера arches of the left forward wheel. At a corresponding complete set it is necessary to remove protection картера.

3. Carefully wipe a jellied/control stopper and a surface adjoining to it картера РКПП.

4. Turn out a stopper, wipe it and replace a sealing washer.

5. Oil level should reach the bottom cut of a jellied/control aperture. The liquid small amount usually accumulates under a stopper and follows at extraction of last from an aperture that at all is not a sign of correctness of filling of a box. For level check wait its terminations вытекания, then start to fill in through an aperture the fresh. Continue liquid refuelling until it will not start to follow too much apertures. It is possible to consider liquid level resulted in norm when will stop вытекание its surplus. Use for level updating only трансмиссионную a liquid of a demanded grade (Specifications to section Weekly checks see).
6. Transmission filling трансмиссионным oil is among enough хлопотных procedures. Besides the other it is necessary to remember that oil distribution on internal cavities РКПП occurs to a certain time delay that it is necessary to consider at intermediate checks of level. Having finished updating of level, oils make on the car a short trip in which course oil should be distributed definitively in a transmission. Then muffle the engine and repeat check.
7. Remember that level check трансмиссионного oils should be made on the car established in strictly horizontal position. Prepare suitable drain capacity for gathering of following surplus.
8. Having finished updating of level of oil, replace a sealing washer and tighten a stopper with demanded effort. Carefully collect the spilt oil, then establish into place an access cover, reliably having fixed its all provided clamps.