MIRROR GLASS
On all models it is possible to replace mirror glass separately.
| PERFORMANCE ORDER |
|
1. Using a wooden wedge, remove old glass of a mirror and disconnect from it electric wires. |
|
2. Connect to new glass of a mirror draught and latch mirror glass on a place (junctions are specified by arrows). Be careful not to break mirror glass. |
|
THE ELECTRIC MOTOR OF THE MIRROR WITH HEATING
| PERFORMANCE ORDER |
| 1. For removal of the electric motor of a drive of a mirror remove mirror glass, then unscrew screws of fastening and disconnect a multicontact electric socket. |
| 2. Installation is made in sequence, return to removal. |
|
MIRROR WITH MANUAL ADJUSTMENT
| PERFORMANCE ORDER |
| 1. Remove the handle of adjustment of position of a mirror and a decorative overlay of a mirror from the interior of a door. |
|
2. Unscrew three screws (are specified by arrows) and remove a mirror. |
| 3. Installation is made in sequence, return to removal. |
|
MIRROR WITH ELECTRIC MANAGEMENT
| PERFORMANCE ORDER |
| 1. Mirror removal is made in the same way, as well as hand-operated mirrors, but thus instead of removal of the handle of management by a mirror it is necessary to disconnect an electric socket of a mirror. The electric socket is located in a door. |
| 2. Installation is made in sequence, return to removal. |
|
|