| 1. Open a cowl and enclose pure rags under cowl corners to protect a paint and varnish covering of the car at cowl removal. |
| 2. In the presence of illumination of a motor compartment disconnect an electric socket from a bulb. |
| 3. Using a marker, note position of hinges on a cowl. |
|
4. Ask the assistant to support a cowl, then unscrew bolts of fastening of the left and right hinges of a cowl. |
| 5. Being careful, remove a cowl. |
| 6. If the new cowl is established, rearrange on it all demountable details. |
| 7. Installation is made in sequence, return to removal. |
|
8. If the probe of the lock of a cowl acted in film, adjust its length and tighten a counternut (1 – the probe, 2 – a washer, 3 – a spring, 4 – a counternut, Х = 40–45 mm). |
| 9. Close a cowl and check up its arrangement concerning adjacent surfaces. |
| 10. Adjust cowl position so that at the closed cowl the backlash on cowl perimetre was identical from different directions. |
| 11. For adjustment ослабьте bolts of fastening of hinges of a cowl and, moving a cowl, adjust its position. |
| 12. For adjustment of a forward part of a cowl on height it is necessary to screw in or unscrew rubber pillows. |