Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. A cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. The electric equipment of a body
+ 14. Electric schemes





13.20. Removal and installation of the central console
THE GENERAL DATA

The central console consists of two parts. The back part is located about the lever of a manual brake, and a lobby is located under the control panel a heater.

PERFORMANCE ORDER
1. Removal of the central console is necessary for beginning with a back part. Using a screw-driver edge as the lever, remove заглушку, closing the screw.
2. Unscrew the screw (it is specified by an arrow) fastenings of a back part of the central console.
3. Shift a back part of the central console back.
4. Removal of a forward part of the central console can be made without the further removal of a back part.
5. For removal of a back part of the central console disconnect from it switches and remove it on the lever of a manual brake.
6. Separate facing from the basis of the lever of a gear change, thus it is possible not to remove a protective cover of the lever of a gear change.
7. Unscrew screws (the screw is specified by an arrow) the fastenings of the central console located in a back part of the lever of a gear change.
8. Unscrew screws (the screw is specified by an arrow) the fastenings of the central console located in a forward part of the lever of a gear change.
9. On models with an automatic transmission remove a decorative overlay of the lever of the selector.
10. Release two скобы and remove an ashtray located under the control panel a heater.
11. Unscrew two screws (the screw is specified by an arrow), fastening the central console to the control panel a heater and remove it.
12. Installation is made in sequence, return to removal.

On the main page