| 1. On models with manual window lifterом completely close a window and note handle position window lifterа. |
| 2. Release скобу fastenings and remove the handle. |
|
3. Скоба (it is specified by an arrow) it is released if to insert a pure fabric between the handle and an upholstery of a door and, stretching a fabric opposite to the ends скобы, to hook скобу and to release it. Thus it is necessary to pull the handle on itself that she after clearing скобы has acted in film with шлицов window lifterа. |
|
4. Using a screw-driver edge as the lever, remove decorative furnish of the internal handle of opening of a door. |
|
5. Unscrew the button of blocking of the lock. |
|
6. Using a screw-driver edge as the lever, remove заглушку from the screw. |
|
7. Unscrew the screw of fastening of a pocket of a door. |
| 8. Unscrew two screws in the bottom part of a pocket and remove a pocket from a door. |
| 9. On back doors remove the ashtray case. |
|
10. Remove a decorative overlay from an armrest. |
|
11. Remove an armrest. Armrest fastening depends on furnish level, but usually armrests fasten two screws from the forward party. Some armrests also fasten in a back part the usual self-cutting screw. |
|
12. On some models the door upholstery fastens the self-cutting screws located on perimetre of an upholstery. Using a screw-driver with a wide edge, separate an upholstery of a door from a door. |
| 13. If necessary remove a protective film from a door. |
| 14. Installation is made in sequence, return to removal. |