Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. A cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. The electric equipment of a body
+ 14. Electric schemes

13.6. Removal and installation of forward furnish of the car
THE GENERAL DATA

Forward furnish of the car includes a lattice of a radiator and a forward bumper.

PERFORMANCE ORDER
1. Unscrew three screws, fastening forward furnish to a platform of the lock of a cowl.
2. Under the car unscrew two nuts (the nut is specified by an arrow), which крепят the bottom part of forward furnish.
3. Pull forward forward furnish of the car and release lateral clamps (are specified by arrows).
4. In the presence of antifog headlights disconnect from them electric sockets.
5. Also at presence disconnect tubes of a washer of headlights.
6. Installation is made in sequence, return to removal.
7. As lateral fastenings of forward furnish rivets which are necessary for drilling are used.


On the main page