Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. A cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. The electric equipment of a body
+ 14. Electric schemes





13.8. Removal and installation of a forward wing Removal

PERFORMANCE ORDER
1. Remove forward furnish of the car.
2. Remove indexes of turns.
3. Remove protection of wings for what push out the central part of plastic percussion caps and take percussion caps from a wing edge.
4. At presence remove a tank of a washer of headlights.
5. Unscrew 12 bolts, крепящих a forward wing.
6. Cut a layer of hermetic and remove a wing.

Installation

PERFORMANCE ORDER
1. Clear from a surface of a body interfaced to a wing the rests of old hermetic and put a thick layer of fresh hermetic.
2. Establish on the car a wing and fix its bolts, having tightened them at this stage by hand.
3. Moving a wing, adjust its position and tighten bolts.
4. Put on an internal surface covered a protective layer, and an external surface paint with a corresponding paint.
5. Establish a tank of a washer of headlights.
6. Establish protection of a wing and fix its new plastic percussion caps.
7. Establish the index of turns and forward furnish of the car.

On the main page