Opel Kadett E

1984-1991 of release

Repair and car operation


Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
- 5. System of cooling, heating and ventilation
   5.1. A technical characteristics
   5.2. Removal and installation of hoses of system of cooling
   5.3. Removal, check and radiator installation
   5.4. Removal, check and thermostat installation
   5.5. Removal and installation of the water pump
   5.6. Check, removal and installation of the electric fan of a radiator
   - 5.7. Check, removal and installation of electric gauges of system of cooling
      5.7.1. A temperature-sensitive element of the fan of a radiator
      5.7.2. The gauge of the index of temperature of a cooling liquid
      5.7.3. A temperature-sensitive element of system of injection of fuel
   5.8. Heating and ventilation system
   + 5.9. Elements of system of heating
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

5.7. Check, removal and installation of electric gauges of system of cooling

5.7.1. A temperature-sensitive element of the fan of a radiator
THE GENERAL DATA

Temperature-sensitive element arrangement

 The temperature-sensitive element of the fan of a radiator is established from a radiator lateral face.

Check

Look the corresponding description in subsection 5.6.

Removal

PERFORMANCE ORDER
The prevention

Removal of a temperature-sensitive element of inclusion of the fan of a radiator make on the cold engine.
1. Or merge cooling liquid from system of cooling below level of installation of a temperature-sensitive element, or have a suitable stopper it is necessary for them to close an aperture after вывинчивания a temperature-sensitive element.
2. Disconnect an electric socket from a temperature-sensitive element of inclusion of the fan of a radiator.
3. Unscrew a temperature-sensitive element of the fan of a radiator from a radiator and remove a sealing ring.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal. At temperature-sensitive element installation use a new sealing ring. Fill in cooling liquid in cooling system.
2. In summary start the engine, warm up it to normal working temperature and check up working capacity of the fan of a radiator.


On the main page