Subaru Legacy/Outback

1999-2003 of release

Repair and car operation

Subaru Legasi, Autbek
- Cars Subaru Legacy, Outback
   Identification numbers and information labels
   Acquisition of spare parts
   Technology of service, the tool and the workplace equipment
   Поддомкрачивание and towage
   Start of the engine from the auxiliary power supply
   Automobile химикалии, cleaners, hermetics
   Diagnostics of malfunctions of knots and car systems
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Identification numbers and information labels

The scheme of an arrangement identification and information шильд (on one of the central door pillars can be in addition fixed шильда with the information on pressure of a rating of tyres)

Process of continuous improvement of let out production is a distinctive feature of any line production. Thus, except for cases of large constructive changes of models descending from the conveyor, results of process of updating in the car operation manual are not shined. However the manufacturer makes out number lists of let out spare parts in view of what special value at purchase of the last is got by the information coded in identification numbers of the car. Doing the order for a demanded spare detail, try to give to the seller fuller information on the car. Necessarily inform the model name, year of release, and also number of a body and the power unit.

The main identification number of the car (VIN)

The main identification number of the car (VIN) is beaten out on a metal plate (шильде) which is fixed on a back partition of an impellent compartment from the passenger party. VIN also it is brought in the passport (ПТС) and the registration certificate of a vehicle. In number the information on date and a car point of production, year of release of model and body type is ciphered.

More low, in table 1, the example of decoding containing in VIN the data (except models for Saudi Arabia) is resulted:

Table 1

Table 2

Model number

Шильда with model number fastens in the top part of a mudguard of the left wing of the car. In table 2 the example of decoding containing in number of model of the data is resulted:

B E 9 C L 7 R

Identification label of systems of decrease in toxicity of the fulfilled gases (VECI)

From the bottom party of a cowl labels with the information on systems of decrease in toxicity of the fulfilled gases and the detailed scheme of a lining of vacuum hoses are fixed.

Identification number of the engine

Identification (serial) number of the engine is put on a platform pierced in the top left corner of a back wall of the power unit, on a joint of the engine with a transmission dome. The engine type can be defined also on the figure standing on the sixth position in VIN (so, to the engine of 2.5 l. There corresponds figure 9). In table 3 the example of decoding containing in identification (serial) number of the engine of the data is resulted:

E Z 3 0 D A X B B B

Table 3

Identification number of transmission

Identification number of transmission is beaten out on a surface of a dome of transmission around its joint with the engine. In table 4 the example of decoding containing in identification (serial) number of transmission of the data is resulted:

T V 1 A 4 Y C A A A

Table 4

Identification number of differential

The arrangement of identification number of differential is presented on an illustration. In table 5 examples of decoding containing in identification (serial) number of differential of the data are resulted:

Back differential 1

V A 1 R E F

Back differential 2

T 1

Table 4

Table 5

On the main page