Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
- 2. Maintenance service
   2.1. Specifications
   2.2. An arrangement of knots and units
   + 2.3. Periodicity of maintenance service and kinds of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tyres
   2.7. Check of level of a liquid in automatic transmission
   2.8. Liquid level in system of a hydrodrive of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, a steering and body details
   2.17. Exhaust system check
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a distributing box
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semiaxes
   2.23. A ventilation zolotnik картера
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of deterioration of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of backlashes in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, бегунок and a distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Check of the valve of system recycling
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

2.16. Greasing of a running gear, suspension brackets, a steering and body details
THE GENERAL DATA

Butterdish шлицевого sliding connection карданного the hinge

The butterdish is specified by an arrow.

The control valve of a butterdish карданного the hinge

The control valve (it is specified by an arrow).

Place of greasing of a bolt of the terminator of turn of wheels

The bolt of the terminator of turn of wheels is greased литолом. A greasing place (it is specified by an arrow).


PERFORMANCE ORDER
1. To greasing are subject карданные hinges, knots of a steering and suspension brackets.
2. Greasing is carried out by a special syringe through butterdishes.
3. Before greasing carefully clear butterdishes.
4. Шлицевое sliding connection is greased until then while greasing will not seem from the control valve.
5. Grease a bolt of the terminator of turn of wheels, loops of doors, a cowl, etc.
6. Grease with aerosol silicone greasing locks and уплотнители doors.


On the main page