Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
- 2. Maintenance service
   2.1. Specifications
   2.2. An arrangement of knots and units
   + 2.3. Periodicity of maintenance service and kinds of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tyres
   2.7. Check of level of a liquid in automatic transmission
   2.8. Liquid level in system of a hydrodrive of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, a steering and body details
   2.17. Exhaust system check
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a distributing box
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semiaxes
   2.23. A ventilation zolotnik картера
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of deterioration of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of backlashes in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, бегунок and a distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Check of the valve of system recycling
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

2.9. Oil replacement in the engine and the oil filter
1. For providing of access to the bottom part of the car, he is necessary for establishing on two supports, either to lift тельфером, or to call in on a hole or a platform.
2. The car should be in horizontal position, the engine should be heated-up.
3. Turn away a stopper маслозаливной mouths.
4. Substitute the pallet, clear and turn away a drain stopper. Merge oil.
5. Clear and tighten a drain stopper.
6. Substitute a vessel under the oil filter, lower the car.
7. By means of a special key release the oil filter then turn out his hands. Immediately incline the filter and merge oil in a vessel.
8. Carefully wipe pure rags a place прилегания the filter on the engine.
9. Slightly oil for the engine a sealing ring of the new filter and wrap the filter into place. Tighten the filter by hand.
10. At first fill in half of volume of oil then wait some minutes that all oil has flown down in the pallet. Continue to add oil in the small portions, before mark achievement "Н" on probeе.
11. Start the engine and on the working engine check up tightness of a stopper of the pallet and the filter, having tracked these places within several minutes.
12. Stop the engine and wait some minutes that oil has flown down in the pallet. Again check up oil level. After filling of all channels and the filter oil level can go down. If necessary add oil to a mark "Н".

On the main page