Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
- 2. Maintenance service
   2.1. Specifications
   2.2. An arrangement of knots and units
   + 2.3. Periodicity of maintenance service and kinds of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tyres
   2.7. Check of level of a liquid in automatic transmission
   2.8. Liquid level in system of a hydrodrive of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, a steering and body details
   2.17. Exhaust system check
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a distributing box
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semiaxes
   2.23. A ventilation zolotnik картера
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of deterioration of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of backlashes in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, бегунок and a distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Check of the valve of system recycling
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

2.35. Liquid replacement in automatic transmission and the filter

Works are carried out on the cooled down engine after recently perfect trip.

1. Lift the car and establish on supports.
2. Substitute the pallet, turn away a drain stopper and merge all liquid, without supposing losses. Put a stopper into place and tighten.
3. Cautiously remove the pallet картера transmissions and merge the liquid rests. For pallet removal turn away bolts and easy blows of a hammer displace, having opened consolidation.
4. Turn away bolts and remove the filter from the block of valves of transmission (bolts of the filter of transmission are specified by arrows).
5. Check up a liquid condition. If the liquid of dark colour also exudes a burnt smell it specifies in a transmission overheat. Presence at the pallet or at the filter of small particles of metal or a frictional material testifies to destruction of details internal transmission devices (multidisk coupling). In this case it is recommended to hand over the car in car-care centre.
6. Wash out the pallet solvent and dry, remove the rests of old consolidation. Establish the new filter, having replaced a lining (it is specified by an arrow).
7. Put on a demountable plane of the pallet the platen of hermetic RTV, leading round apertures from within.
8. Dress on a branch pipe of the index of level a hose and establish the pallet. In regular intervals and gradually tighten bolts till the set moment.
9. Lower the car and through a hose on a branch pipe fill in about 3,5 l трансмиссионной liquids the recommended mark it is specified in subsection 2.1.
10. Translate the selector in position Park and start the engine.
11. Translate the selector in all positions, again translate in position Park and check up level, if necessary add a liquid, having finished level to the normal.
12. At the first trips watch liquid level (on heated-up transmission) and check presence подтеканий from картера.

On the main page