| 1. Insufficient or superfluous level of a liquid in automatic transmission leads to a unit exit out of operation. |
|
2. Level should be checked after a trip to a usual mode on distance of 16 km (at warm weather) that the liquid has got warm to working temperature (not less than 60-70 °). After a long trip, or a trip with the big loading wait not less than 30 minutes
|
|
3. Establish the car on an equal horizontal platform, include a manual brake, start the engine and press a brake pedal. The selector lever translate from position Р through all range and again put in River position
|
| 4. Get control probe from a branch pipe (the engine continues to idle), wipe probe. |
| 5. Again insert probe into a branch pipe. |
| 6. Get probe and check up liquid level. Level should be in a range designated Hot (hot). On cold transmission level should be in range Cold (cold). If it is necessary to add a liquid accurately pour in necessary quantity of a liquid of the corresponding mark through a branch pipe. |
| 7. To add a liquid through a funnel in the small portions (the quantity of a liquid between marks Hot makes about 0,57 l. |
| 8. If the liquid of black colour, or possesses "a burnt" smell it is necessary to replace a liquid (see subsection 2.35). |