Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
- 2. Maintenance service
   2.1. Specifications
   2.2. An arrangement of knots and units
   + 2.3. Periodicity of maintenance service and kinds of procedural works
   2.4. Intensive service
   + 2.5. Check of level of liquids
   2.6. Check of tyres
   2.7. Check of level of a liquid in automatic transmission
   2.8. Liquid level in system of a hydrodrive of a steering
   2.9. Oil replacement in the engine and the oil filter
   2.10. Care of the battery
   2.11. Check of system of cooling
   2.12. Check of a condition of the hoses located in a motor compartment
   2.13. Screen wiper brushes
   2.14. Shift of wheels
   2.15. Check of a suspension bracket of a steering
   2.16. Greasing of a running gear, suspension brackets, a steering and body details
   2.17. Exhaust system check
   2.18. Check of level of oil in a manual transmission
   2.19. Check of level of oil in a distributing box
   2.20. Check of level of oil in a reducer
   2.21. Check of seat belts
   2.22. Check of covers of semiaxes
   2.23. A ventilation zolotnik картера
   2.24. A filtering element of the air filter
   2.25. Belts of a drive of hinged units
   2.26. Check of fuel system
   2.27. Check of deterioration of brakes
   2.28. Check and adjustment of pedals of coupling (brake)
   2.29. Replacement of candles
   2.30. Check and adjustment of backlashes in valves
   2.31. Replacement of the fuel filter
   2.32. High-voltage wires, бегунок and a distributor cover
   2.33. Care of cooling system
   2.34. Naves and bearings of forward wheels
   2.35. Liquid replacement in automatic transmission and the filter
   + 2.36. Oil replacement
   2.37. Check of a tank with an absorber
   2.38. Check of the valve of system recycling
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

2.28. Check and adjustment of pedals of coupling (brake) PEDAL HEIGHT

PERFORMANCE ORDER
1. Check up distance of pillows of pedals from a floor. If this distance differs from norm adjust.
2. For adjustment of a pedal of coupling release a counternut of an adjusting bolt or the switch (), release a rod counternut (). Rotating a rod, adjust distance so that it corresponded to the range middle. Tighten a rod counternut.
3. For check of height of a pedal of a brake start the engine and press some times a pedal then check up pedal height. For adjustment release a counternut of an adjusting bolt or the switch (), release a rod counternut (). Rotating a rod, adjust distance so that it corresponded to the range middle. Tighten a rod counternut.
4. Wrap the switch or a terminator bolt clockwise before contact with a pedal platform. Tighten a counternut.

PEDAL FREE WHEELING

PERFORMANCE ORDER
1. Press a pedal a finger and measure distance to sensation of a weakness in resistance to moving.
2. In need of adjustment of a free wheeling of a pedal of coupling release a counternut of a rod and displace a rod so that the free wheeling corresponded to norm. Tighten a counternut.
3. For adjustment of a free wheeling of a pedal of a brake on the stopped engine press 10–12 times a pedal then check up a course. Release a counternut of a rod and displace a rod so that the free wheeling corresponded to norm. Tighten a counternut.


On the main page