| 1. Remove a gear belt and a leading asterisk коленвала. |
|
|
2. Define depth запрессовки an epiploon, then make an incision an epiploon edge (1 – the made an incision part) and cautiously get an epiploon from the case of the oil pump, having hooked a screw-driver wound with a tape. |
| 3. Clear an aperture under an epiploon and slightly grease an external surface and working edges of a new epiploon with oil for the engine. |
|
4. Cautiously without warps запрессуйте a new epiploon into place with the help оправки with a diameter a bit smaller than diameter of an epiploon. Depth запрессовки is defined on the put label. After installation be convinced that epiploon edges were not unbent. |
| 5. Establish other details upside-down. On engines of 3,4 l take measures not to damage an insert of the gauge of rotation коленвала on a leading asterisk. |