Citroen Xantia

Since 1993 of release

Repair and car operation



Citroen Xantia
+ Introduction
+ The operation manual
+ Routine maintenance
- Engine repair
   + The repair procedures which are not demanding extraction of the engine from the car - petrol engines
   - The repair procedures which are not demanding extraction of the engine from the car - diesel engines
      Measurement компрессионного pressure and engine check on tightness
      Fixing cranked / distributive shaft and ТНВД for the purpose of prevention of casual hit of valves in contact to pistons in the course of performance of procedures of service of the car
      Removal and installation of a cover of a head of cylinders
      Removal and installation of a pulley of a cranked shaft
      Removal and installation of covers газораспределительного a belt
      Belt of drive ГРМ - the general information, removal, check of a condition and installation
      Removal and installation of cogwheels of a belt of drive ГРМ
      Removal and installation of components of the right support of the power unit and натяжителя газораспределительного a belt
      Removal and installation of an intermediate roller газораспределительного a belt
      Removal, check of a condition and installation of a camshaft and pushers of valves
      Check and adjustment клапанных backlashes
      Removal and installation of a head of cylinders
      Removal and pallet installation картера
      Removal, check of a condition and installation of the oil pump with приводной a chain
      Replacement of epiploons
      Gauges of level, pressure and temperature of impellent oil - the general information
      Removal, check of a condition and installation of a flywheel/privodnogo of a disk
      Check of a condition and replacement of support of a suspension bracket of the power unit
      Removal and installation маслоохладителя
   + Removal and engine major repairs
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Coupling
+ Transmission
+ Power shafts
+ Uniform hydraulic system
+ Brake system
+ Running gear and steering
+ Body and salon furnish
+ Onboard electric equipment
+ Electric equipment schemes





Removal and installation of an intermediate roller газораспределительного a belt

Removal

 PERFORMANCE ORDER

1. Remove a belt of a drive of auxiliary units (address to the Head Routine maintenance).
2. Achieve combination of blocking apertures (Fixing cranked / distributive shaft and ТНВД for the purpose of prevention of casual hit of valves in contact to pistons in the course of performance of procedures of service of the car see) and fix cogwheels of a camshaft and ТНВД, and also a flywheel. At all do not suppose проворачивания the blocked engine.
3. Loosen the an axial nut and an adjusting bolt натяжителя also develop an arm of the last counter-clockwise, having weakened thereby a tension газораспределительного a belt. Having tightened an adjusting bolt, fix натяжитель in new position. In case of need take advantage for deployment натяжителя of a 10-millimetric drive which can be inserted into a special square aperture in an arm.
4. Turn out two bolts and a hairpin of fastening of an intermediate roller to the block of cylinders. Pay attention that the top bolt is used also for fastening of an arm of a support of the power unit.
5. Slightly ослабьте the remained four bolts of fastening of a support (the top is located from the interior of a forward plate of the engine and it is used also for fastening of an elevating eye of the power unit).

Installation

Installation is made upside-down. Pay attention to following moments:
   a) Track observance of demanded efforts of a tightening of fixture;
   b) Installation and a tension газораспределительного a belt make according to the instructions resulted in section the Belt of drive ГРМ - the general information, removal, check of a condition and installation;
   c) the Description of procedure of installation of a belt of a drive of auxiliary units is resulted in the Head Routine maintenance.

On the main page