Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
- 12. A suspension bracket and a steering
   12.1. A technical characteristics
   + 12.2. A rack of a forward suspension bracket
   12.3. Replacement of the bearing of a forward wheel
   + 12.4. The bottom lever of a forward suspension bracket
   12.5. Removal and installation of the forward stabilizer of cross-section stability
   12.6. Adjustment of the bearing of a back wheel
   + 12.7. A nave of a back wheel
   12.8. Replacement of the back shock-absorber
   + 12.9. The back stabilizer of cross-section stability
   12.10. Replacement of back springs
   12.11. Removal and installation of a back beam
   12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
   12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
   12.14. Check of system of a self-levelled back suspension bracket
   12.15. Removal and steering wheel installation
   + 12.16. A steering column
   12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
   12.18. Removal and installation of tips of steering draught
   + 12.19. Steering transfer
   12.20. Removal of air from system of a steering with the amplifier
   12.21. Removal and installation of the pump of the amplifier of a steering
   12.22. Removal and installation пополнительного a tank of hydraulic system
   12.23. Corners of installation of forward wheels
+ 13. A body
+ 14. Electric schemes





12.21. Removal and installation of the pump of the amplifier of a steering
THE GENERAL DATA

Arrangement of bolts of fastening and bolts which is necessary for weakening at tension adjustment drive a belt of the pump of the amplifier of a steering

And – шарнирные bolts of the pump,

In – шарнирный a bolt of the mechanism of a tension,

With – an assembly bolt of the mechanism of a tension

PERFORMANCE ORDER
1. Remove a belt of a drive of the pump of the amplifier of a steering.
2. Disconnect from the pump pipelines and close the ends of pipelines suitable stoppers.
3. Unscrew bolts and remove the pump.
4. At a pump exit out of operation it is necessary to replace it, as pump repair is not provided.
5. Installation is made in sequence, return to removal.
6. At connection of pipelines use new sealing rings.
7. Establish and adjust a tension of a belt of a drive of the pump of the amplifier of a steering.
8. Add a liquid in system of a steering and remove air from hydraulic system.

On the main page