Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. A cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   - 13.17. Seats
      13.17.1. Removal and installation of a forward seat
      13.17.2. Removal and installation of a back seat
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. The electric equipment of a body
+ 14. Electric schemes





13.17.2. Removal and installation of a back seat Removal

PERFORMANCE ORDER
1. Remove decorative overlays from hinges in a forward part of back sitting.
2. Remove lock rings and take pins of hinges (the arrow notes a lock ring).
3. Remove a pillow of back sitting.
4. Take percussion caps and remove a carpet covering from an underside of a back of back sitting.
5. Release a back of back sitting from the top fastenings.
6. Unscrew lateral hinges and remove a back.
7. Take an axis of the hinge of a back of back sitting.
8. Unscrew furnish of the central hinge.
9. If the compound back of back sitting is established, unscrew also the central hinge.
10. On models the Sedan the latch of a back of back sitting fastens a nut accessible from a luggage space.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Installation of a back of compound sitting begin with the central part.
3. On models the Hatchback for adjustment of a shock plate of a latch it is necessary to weaken a nut in a back part of a pin of a shock plate.
4. Then establish a sitting back into place and tighten a nut (1 – a pin of a shock plate, 2 – distance to the second shock plate 116225 mm, 3 – a back, 4 – the back panel).

On the main page