Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   - 13.5. A cowl
      13.5.1. Removal and cowl installation
      13.5.2. Removal and installation of a cable of the lock of a cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. The electric equipment of a body
+ 14. Electric schemes

13.5.2. Removal and installation of a cable of the lock of a cowl
PERFORMANCE ORDER
1. Open a cowl.
2. Unscrew a bolt, крепящий скобу, keeping a cable of opening of the lock of a cowl, to a back part of a platform of the lock of a cowl.
3. Using a screw-driver edge as the lever, remove a cable and its fastening.
4. Working in car salon, disconnect a cable from the lever of opening of a cowl and a cover of a cable from an arm.
5. Take a sealing ring of a cable from a partition of a motor compartment and take a cable in a motor compartment.
6. Installation is made in sequence, return to removal.
7. Adjust cable position under скобой the forward panel so that at the released lever of opening of a cowl the cable had insignificant sagging.
8. Check up that the cowl lock opens, when the assistant will pull for the lever of opening of a cowl.


On the main page