Subaru Legacy/Outback

1999-2003 of release

Repair and car operation


Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   - Forward suspension bracket
      Removal, service and installation of cross-section levers of a forward suspension bracket
      Removal, check of a condition and installation of spherical support
      Removal, service and installation of forward racks
      Removal, check of a condition of components and installation of the forward stabilizer of cross-section stability
      Removal and installation of a cross-section beam of a forward suspension bracket
   + Back suspension bracket
   + Steering
   + Wheel assemblages, suspension bracket geometry
+ Body
+ Onboard electric equipment

Removal, check of a condition of components and installation of the forward stabilizer of cross-section stability

Details of installation of fastening to a cross-section beam of a suspension bracket домкратной plates and bars of the stabilizer of cross-section stability

1 — a stabilizer Bar
2 — the Cross-section beam

3 — Domkratnaja a plate


Track correctness of landing and conformity of colour marks of rubber plugs on a bar of the stabilizer of cross-section stability

1 — the Landing label on a stabilizer bar

2 — the Color identification label

REMOVAL

 PERFORMANCE ORDER

1. Поддомкратьте redock of the car also establish it on props.
2. Remove established with the bottom party of a forward cross-section beam домкратную a plate.
3. Turn out boats of collars of fastening of a bar of the stabilizer of cross-section stability to a cross-section beam.

4. Turn out bolts of fastening of racks of the stabilizer to cross-section levers of a suspension bracket. Also take a bar of the stabilizer of cross-section stability from under the car.

CHECK

 PERFORMANCE ORDER

1. Check up rubber plugs on presence of signs of ageing of a material, cracks, cuts and other damages, replace the failed components.
2. Check up stabilizer racks on presence of deformations, cracks and other damages, estimate landing density резинометаллических plugs. In case of need replace racks.

INSTALLATION

 PERFORMANCE ORDER

 Самоконтрящиеся nuts is subject to replacement without fail!

Installation is made in an order, the return to an order of dismantle of components. Track, that adjusting labels on rubber plugs of collars of fastening of a bar of the stabilizer to a cross-section beam have appeared in the correct image are combined with landing labels on a bar, also track conformity of colour of marks of plugs to colour of landing labels on a bar. All fixture tighten with demanded effort.


On the main page