Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   - 7.2. Coupling
      7.2.1. The main cylinder of coupling
      7.2.2. The working cylinder of coupling
      7.2.3. Coupling details
      7.2.4. The vyzhimnoj bearing
      7.2.5. The directing bearing
      7.2.6. A coupling hydrodrive
      7.2.7. A coupling pedal
      7.2.8. The blocking switch of coupling
   + 7.3. Карданный () a shaft () and карданные hinges
   7.4. Back and forward axes
   7.5. The bearing, an epiploon and полуось the back bridge
   7.6. An epiploon of a reducer of the back bridge and a forward axis
   7.7. The back bridge
   7.8. Forward semiaxes
   7.9. Replacement of covers and SHRUS dismantling
   + 7.10. An electromagnetic drive of a forward leading axis (ADD-system)
   7.11. A forward reducer
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

7.2.2. The working cylinder of coupling

Removal and installation

PERFORMANCE ORDER
1. Remove from a cylinder pusher spring скобу.
2. Lift car redock.
3. Turn away a nut of fastening of a tube of a hydrodrive.
4. Turn away bolts (are specified by arrows) and remove the cylinder.
5. Installation is carried out upside-down. Check up a condition of a dustproof cover. Fill in a liquid and remove air.


On the main page