Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
- 7. Transmission elements
   7.1. Specifications
   - 7.2. Coupling
      7.2.1. The main cylinder of coupling
      7.2.2. The working cylinder of coupling
      7.2.3. Coupling details
      7.2.4. The vyzhimnoj bearing
      7.2.5. The directing bearing
      7.2.6. A coupling hydrodrive
      7.2.7. A coupling pedal
      7.2.8. The blocking switch of coupling
   + 7.3. Карданный () a shaft () and карданные hinges
   7.4. Back and forward axes
   7.5. The bearing, an epiploon and полуось the back bridge
   7.6. An epiploon of a reducer of the back bridge and a forward axis
   7.7. The back bridge
   7.8. Forward semiaxes
   7.9. Replacement of covers and SHRUS dismantling
   + 7.10. An electromagnetic drive of a forward leading axis (ADD-system)
   7.11. A forward reducer
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

7.2.7. A coupling pedal

Height and free wheeling of a pedal of coupling

1. A definition place люфта a pusher (free wheeling)

2. A place of adjustment of height of a pedal

3. Pedal height

4. A free wheeling

Check and adjustment

1. Remove a rug to provide access to an antinoise covering.
2. Check up distance of a pedal from a floor.
3. For adjustment remove the bottom facing, release a counternut and rotating a bolt, adjust pedal height. Tighten a counternut.
4. Check up a free wheeling, i.e. distance from position of completely released pedal to a place in which resistance to its course starts to be felt.
5. For adjustment release a counternut of a pusher and rotating a pusher, adjust a pedal course. Tighten a counternut.
6. Again check up height and a pedal free wheeling. If necessary adjust.
7. Check up adjustment of the blocking switch of coupling.

On the main page