Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   - 6.1. The power supply system of carburettor engines
      6.1.1. Replacement of a filtering element of the air filter
      6.1.2. Removal and installation of the air filter
      6.1.3. Temperature regulator check
      6.1.4. Check of the valve of a temperature regulator
      6.1.5. Removal and installation of the fuel pump
      6.1.6. Check of pressure of forcing of the fuel pump
      6.1.7. Removal and installation of a cable of a drive of an accelerator
      6.1.8. Adjustment of a cable of a drive of an accelerator
      6.1.9. Replacement of the gauge of level of fuel
      6.1.10. Removal and installation of a fuel tank
      6.1.11. Replacement of the filter of thin clearing of fuel
      6.1.12. Removal and carburettor installation
      + 6.1.13. Dismantling and carburettor assemblage
      + 6.1.14. Carburettor Pierburg adjustments 1B3
      + 6.1.15. Carburettor Pierburg adjustments 2Е2
      - 6.1.16. Carburettor Keihin adjustments
         6.1.16.1. Adjustment of frequency of rotation of start-up of the engine
         6.1.16.2. Adjustment of a starting backlash air заслонки
         6.1.16.3. Adjustment приоткрывания throttle заслонки the second chamber
         6.1.16.4. Adjustment of productivity of the accelerating pump
         6.1.16.5. Idling adjustment
   + 6.2. The power supply system of engines with fuel injection
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

6.1.16.1. Adjustment of frequency of rotation of start-up of the engine
THE GENERAL DATA

Adjustment приоткрывания throttle заслонки the first chamber of carburettor Keihin

Cжатие the lever flat-nose pliers.

1 – the lever of a drive throttle заслонки the first chamber;

2 – a rod of a pneumodrive throttle заслонки the first chamber

Разгибание the lever by means of a screw-driver.

1 – the lever of a drive throttle заслонки the first chamber;

2 – a rod of a pneumodrive throttle заслонки the first chamber

PERFORMANCE ORDER
1. To warm up the engine.
2. To remove the air filter (subsection 6.1.2 see).
3. To disconnect a vacuum hose (1) from a pneumodrive (2) throttle заслонки the first chamber.
4. To connect a control tachometre according to the manufacturer instruction.
5. To start the engine and to leave to idle.
6. To check up frequency of rotation on a control tachometre, it should be 3500 mines-1. If necessary to adjust frequency of rotation, bending or unbending a plug of the lever of a drive throttle заслонки the first chamber.
7. To remove the carburettor and probeами to check up приоткрывание throttle заслонки the first chamber which should be on models with mechanical transmission (1,3±0,1) mm, and on models with automatic transmission (1,5±0,1) mm. If necessary to adjust приоткрывание throttle заслонки, bending / compressing or unbending / unclenching a lever plug.


On the main page