Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   - 6.1. The power supply system of carburettor engines
      6.1.1. Replacement of a filtering element of the air filter
      6.1.2. Removal and installation of the air filter
      6.1.3. Temperature regulator check
      6.1.4. Check of the valve of a temperature regulator
      6.1.5. Removal and installation of the fuel pump
      6.1.6. Check of pressure of forcing of the fuel pump
      6.1.7. Removal and installation of a cable of a drive of an accelerator
      6.1.8. Adjustment of a cable of a drive of an accelerator
      6.1.9. Replacement of the gauge of level of fuel
      6.1.10. Removal and installation of a fuel tank
      6.1.11. Replacement of the filter of thin clearing of fuel
      6.1.12. Removal and carburettor installation
      + 6.1.13. Dismantling and carburettor assemblage
      + 6.1.14. Carburettor Pierburg adjustments 1B3
      + 6.1.15. Carburettor Pierburg adjustments 2Е2
      - 6.1.16. Carburettor Keihin adjustments
         6.1.16.1. Adjustment of frequency of rotation of start-up of the engine
         6.1.16.2. Adjustment of a starting backlash air заслонки
         6.1.16.3. Adjustment приоткрывания throttle заслонки the second chamber
         6.1.16.4. Adjustment of productivity of the accelerating pump
         6.1.16.5. Idling adjustment
   + 6.2. The power supply system of engines with fuel injection
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

6.1.16.3. Adjustment приоткрывания throttle заслонки the second chamber
THE GENERAL DATA

Adjustment приоткрывания throttle заслонки the second chamber of carburettor Keihin

1 – a counternut;

2 – the restrictive screw throttle заслонки the second chamber

PERFORMANCE ORDER
1. To remove the carburettor.
2. To turn away the restrictive screw, preliminary having turned away a counternut so that it has departed from an emphasis. Then to wrap it to a contact of an emphasis and to tighten for a half-turn. To tighten a counternut and законтрить a paint drop.
3. To adjust frequency of rotation of idling (subsection 6.1.16.5 see).


On the main page