Audi 100
1982-1990 of release
Repair and car operation
Audi 100
+
1.1. Controls and devices
+
2. Technical characteristics
+
3. Engines
+
4. Cooling system
+
5. An exhaust system
-
6. The power supply system
-
6.1. The power supply system of carburettor engines
6.1.1. Replacement of a filtering element of the air filter
6.1.2. Removal and installation of the air filter
6.1.3. Temperature regulator check
6.1.4. Check of the valve of a temperature regulator
6.1.5. Removal and installation of the fuel pump
6.1.6. Check of pressure of forcing of the fuel pump
6.1.7. Removal and installation of a cable of a drive of an accelerator
6.1.8. Adjustment of a cable of a drive of an accelerator
6.1.9. Replacement of the gauge of level of fuel
6.1.10. Removal and installation of a fuel tank
6.1.11. Replacement of the filter of thin clearing of fuel
6.1.12. Removal and carburettor installation
+
6.1.13. Dismantling and carburettor assemblage
+
6.1.14. Carburettor Pierburg adjustments 1B3
+
6.1.15. Carburettor Pierburg adjustments 2Е2
-
6.1.16. Carburettor Keihin adjustments
6.1.16.1. Adjustment of frequency of rotation of start-up of the engine
6.1.16.2. Adjustment of a starting backlash air
заслонки
6.1.16.3. Adjustment
приоткрывания
throttle
заслонки the
second chamber
6.1.16.4. Adjustment of productivity of the accelerating pump
6.1.16.5. Idling adjustment
+
6.2. The power supply system of engines with fuel injection
+
6.3. The power supply system of the diesel engine
+
7. Transmission
+
8. A running gear
+
9. A steering
+
10. Brake system
+
11. A body
+
12. An electric equipment
6.1.16.2. Adjustment of a starting backlash air
заслонки
THE GENERAL DATA
The lever of a drive air
заслонки
carburettor Keihin
1 – the lever of a drive air
заслонки
;
2 – a pneumodrive rod;
3 – an elastic band fixing the lever;
4 – a pneumodrive air
заслонки
;
5 – the case of the automatic starting arrangement
Adjustment of a starting backlash air
заслонки
carburettor Keihin
1 – the lever of a drive air
заслонки
;
2 – the persistent lever;
3 –
гток a
pneumodrive air
заслонки
;
4 – an elastic band fixing the lever
PERFORMANCE ORDER
1.
To remove the air filter (
subsection 6.1.2
see
).
2.
To uncover the automatic starting arrangement (fig.
of the Detail of carburettor Keihin
see
).
3.
To turn the lever of a drive air
заслонки
against the stop counter-clockwise and to fix in this position.
4.
To push on an arrow a rod (fig. the
Lever of a drive air
заслонки
carburettor Keihin
see
) pneumodrive against the stop.
5.
To measure
probeами a
starting backlash air
заслонки
. It should be (5,6±0,15) mm.
6.
If necessary to adjust a backlash, bending / compressing and unbending/unclenching a lever plug (fig.
Adjustment of a starting backlash air
заслонки
carburettor Keihin
see
).
On the main page