Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   - 6.1. The power supply system of carburettor engines
      6.1.1. Replacement of a filtering element of the air filter
      6.1.2. Removal and installation of the air filter
      6.1.3. Temperature regulator check
      6.1.4. Check of the valve of a temperature regulator
      6.1.5. Removal and installation of the fuel pump
      6.1.6. Check of pressure of forcing of the fuel pump
      6.1.7. Removal and installation of a cable of a drive of an accelerator
      6.1.8. Adjustment of a cable of a drive of an accelerator
      6.1.9. Replacement of the gauge of level of fuel
      6.1.10. Removal and installation of a fuel tank
      6.1.11. Replacement of the filter of thin clearing of fuel
      6.1.12. Removal and carburettor installation
      + 6.1.13. Dismantling and carburettor assemblage
      + 6.1.14. Carburettor Pierburg adjustments 1B3
      + 6.1.15. Carburettor Pierburg adjustments 2Е2
      - 6.1.16. Carburettor Keihin adjustments
         6.1.16.1. Adjustment of frequency of rotation of start-up of the engine
         6.1.16.2. Adjustment of a starting backlash air заслонки
         6.1.16.3. Adjustment приоткрывания throttle заслонки the second chamber
         6.1.16.4. Adjustment of productivity of the accelerating pump
         6.1.16.5. Idling adjustment
   + 6.2. The power supply system of engines with fuel injection
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

6.1.16.4. Adjustment of productivity of the accelerating pump
THE GENERAL DATA

The screw of adjustment of quality (structure) of a mix of carburettor Keihin

1 – the screw of adjustment of quality (structure) of a mix;

2 – a control lever throttle заслонкой the first chamber;

3 – a pneumodrive air заслонки

PERFORMANCE ORDER
1. To remove the carburettor and to substitute under it a beaker.
2. To take away the lever from the automatic starting arrangement and to fix it in this position, having inserted a core in diameter of 12 mm between the lever and the carburettor case.
3. Smoothly ten times completely to open and close throttle заслонку the first chamber, putting it in action the accelerating pump.
4. To measure quantity of fuel in a beaker, the received value to divide into ten. The result is pump giving for one cycle. For one cycle the accelerating pump should submit (0,82±0,12) fuel sm3.
5. If it is necessary to adjust productivity, slightly turn in the lever (fig. of the Detail of carburettor Keihin see) in a fastening place оттяжной springs.


On the main page