Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
- 12. A suspension bracket and a steering
   12.1. A technical characteristics
   + 12.2. A rack of a forward suspension bracket
   12.3. Replacement of the bearing of a forward wheel
   - 12.4. The bottom lever of a forward suspension bracket
      12.4.1. Removal and installation of the bottom lever of a forward suspension bracket
      12.4.2. Replacement of plugs of the bottom lever of a forward suspension bracket
      12.4.3. Replacement of the spherical hinge of the bottom lever of a forward suspension bracket
   12.5. Removal and installation of the forward stabilizer of cross-section stability
   12.6. Adjustment of the bearing of a back wheel
   + 12.7. A nave of a back wheel
   12.8. Replacement of the back shock-absorber
   + 12.9. The back stabilizer of cross-section stability
   12.10. Replacement of back springs
   12.11. Removal and installation of a back beam
   12.12. Replacement of the plug of the longitudinal lever of a back suspension bracket
   12.13. Replacement of elements of a back suspension bracket with sheet springs (Pickup)
   12.14. Check of system of a self-levelled back suspension bracket
   12.15. Removal and steering wheel installation
   + 12.16. A steering column
   12.17. Replacement of the cylinder of the lock and contact group of the lock of ignition
   12.18. Removal and installation of tips of steering draught
   + 12.19. Steering transfer
   12.20. Removal of air from system of a steering with the amplifier
   12.21. Removal and installation of the pump of the amplifier of a steering
   12.22. Removal and installation пополнительного a tank of hydraulic system
   12.23. Corners of installation of forward wheels
+ 13. A body
+ 14. Electric schemes





12.4.2. Replacement of plugs of the bottom lever of a forward suspension bracket
PERFORMANCE ORDER
1. Remove the bottom lever.
2. Using a press and оправку the corresponding diameter, squeeze out the forward plug from the bottom lever of a forward suspension bracket. Plug expression make from the forward party of the lever to the back.
3. Moisten the new forward plug with soap water and, using a press and оправку the corresponding diameter, press the plug into the bottom lever of a forward suspension bracket. Plug installation make from the forward party of the lever. Vystupanie plugs from the bottom lever should be uniform.
4. Note an arrangement of the back plug on the lever, then, resting against a forward part of the back plug, remove it from the lever.
5. Moisten the new plug with soap water and establish it so that the flat surface of the plug has been directed to a pin of the spherical hinge.
6. Establish the bottom lever.

On the main page