Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   + Forward suspension bracket
   - Back suspension bracket
      Removal, check of a condition of components and installation of the back stabilizer of cross-section stability
      Removal, service and installation of longitudinal levers of a back suspension bracket
      Removal, service and installation of the top cross-section lever of a back suspension bracket
      Removal, service and installation of back telescopic shock-absorbers
      Removal and installation of the forward cross-section lever of a back suspension bracket
      Removal, service and installation of the back cross-section lever of a back suspension bracket
      Removal and installation of forward extensions of a back stretcher
      Removal and installation of a back stretcher
      Removal and installation of buffer elements
   + Steering
   + Wheel assemblages, suspension bracket geometry
+ Body
+ Onboard electric equipment

Removal and installation of the forward cross-section lever of a back suspension bracket

REMOVAL

 PERFORMANCE ORDER

1. Release wheel nuts, поддомкратьте a back of the car and establish it on props, remove back wheels.
2. Prop up levelled horizontally longitudinal lever of a back suspension bracket трансмиссионным a jack.

3. Give a fixing nut and take an axial bolt of fastening of the forward cross-section lever to a stretcher.

4. Give a nut of the second axial bolt, separate the forward cross-section lever from the longitudinal lever of a suspension bracket and take it from under the car.

5. Visually estimate a condition of the removed lever and its axial plugs, replace the failed components.

INSTALLATION

 PERFORMANCE ORDER

 Самоконтрящиеся nuts is subject to replacement without fail!


1. Installation is made in an order, the return to an order of dismantle of components, track correctness of an arrangement of the lever at installation. The effort of a tightening of nuts of axial bolts makes 120 Nanometers.

2. In summary drive away the car on a car repair shop for check and adjustment of corners of installation of back wheels.


On the main page