Subaru Legacy/Outback

1. Release wheel nuts, поддомкратьте a back of the car and establish it on props, remove back wheels.
2. Turn out bolts of collars of fastening of a bar of the stabilizer of cross-section stability to a stretcher.

3. At removal right remove the right extension of a stretcher.

4. Remove a corresponding rack of the stabilizer of cross-section stability (see Has undressed Removal, check of a condition of components and installation of the back stabilizer of cross-section stability).
5. Level horizontally and prop up трансмиссионным a jack the longitudinal lever of a back suspension bracket.

6. Release a nut of an axial bolt of fastening of the back cross-section lever to the longitudinal lever of a suspension bracket.

7. Mark adjusting position of an adjusting/axial bolt of fastening of the internal end of the back cross-section lever concerning a stretcher. Keeping a bolt from проворачивания the second key, release a fixing nut, take an adjusting/axial bolt and remove the back cross-section lever.

8. Visually estimate a condition of the lever and it резинометаллических axial plugs, replace the failed components.

1. Installation is made in an order, the return to an order of dismantle of components. Track horizontal position of an arrangement of the longitudinal lever of a suspension bracket on a jack. At installation of an internal adjusting/axial bolt see to correctness of combination of the landing labels put in the course of dismantle.
2. In summary drive away the car on a car repair shop for check and adjustment of corners of installation of back wheels.