Subaru Legacy/Outback

1. Separate back section of system of release of the fulfilled gases from a lobby, remove back section of system of release in gathering with the muffler (see the Head of the Power supply system and release).
2. Remove assemblage of back differential (Coupling see the Head).
3. Disconnect from a stretcher forward, back and top cross-section levers (Sections Removal and installation of the forward cross-section lever of a back suspension bracket, Removal, service and installation of the back cross-section lever of a back suspension bracket and Removal, service and installation of the top cross-section lever of a back suspension bracket see).

4. Prop up a stretcher трансмиссионным a jack.

5. Remove a forward extension of a stretcher (see Has undressed Removal and installation of forward extensions of a back stretcher).
6. Turn out fixing bolts and take a stretcher from under the car.
7. Check up the removed components on presence of signs of deterioration and damages, replace the failed details.

1. Installation is made in an order, the return to an order of dismantle of components. Track, that in the course of installation longitudinal levers have been levelled on a jack horizontally.
2. In summary drive away the car on a car repair shop for check and adjustment of corners of installation of back wheels.