Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
- Suspension bracket and steering
   Specifications
   + Forward suspension bracket
   - Back suspension bracket
      Removal, check of a condition of components and installation of the back stabilizer of cross-section stability
      Removal, service and installation of longitudinal levers of a back suspension bracket
      Removal, service and installation of the top cross-section lever of a back suspension bracket
      Removal, service and installation of back telescopic shock-absorbers
      Removal and installation of the forward cross-section lever of a back suspension bracket
      Removal, service and installation of the back cross-section lever of a back suspension bracket
      Removal and installation of forward extensions of a back stretcher
      Removal and installation of a back stretcher
      Removal and installation of buffer elements
   + Steering
   + Wheel assemblages, suspension bracket geometry
+ Body
+ Onboard electric equipment

Removal, service and installation of back telescopic shock-absorbers

Details of installation of the back shock-absorber

1 — the Top support
2 — the Top rubber saddle of a spring
3 — the Protective cover
4 — the Screw spring
5 — the Telescopic shock-absorber
6 — Samokontrjashchiesja of a nut

Efforts of a tightening of carving connections, Nanometer

Т1: 30
Т2: 35
Т3: 160

REMOVAL

 PERFORMANCE ORDER

1. Поддомкратьте the car also establish it on props and remove back wheels.

2. On models Outback/Legacy the Versatile person release clamps and remove a carpet covering of a floor of a luggage space.

3. On models the Sedan remove a carpet covering of a floor of a luggage space and unbend the panel of lateral furnish from the corresponding party of the car.

4. Release a fixing nut and remove a bolt of fastening of the bottom support of the telescopic shock-absorber to the longitudinal lever of a back suspension bracket.

5. In a luggage space release nuts of fastening of the top support of the shock-absorber to кузовной panels.

6. Remove the shock-absorber.

Service

 PERFORMANCE ORDER

1. The description of procedures of service of the shock-absorber see in corresponding subsections Has undressed Removal, service and installation of forward racks.

2. Before recycling of the failed shock-absorber it is necessary to extend against the stop outside its piston rod and to drill in a corresponding place of the case an aperture in diameter of 2-3 mm.

INSTALLATION

 PERFORMANCE ORDER

1. Prop up the shock-absorber a jack and tighten with demanded effort (30 Nanometers) NEW самоконтрящиеся nuts of fastening of its top support to кузовному to an element.
2. Having turned, get a regular automobile jack between the cross-section lever of a suspension bracket and a stretcher and adjust it so that apertures in the bottom support of the back shock-absorber were combined with reciprocal apertures in the cross-section lever.

 In order to avoid stretcher damage enclose under a head of a jack rags.

3. A transmissionnym jack level the longitudinal lever horizontally and tighten with demanded effort (160 Nanometers) NEW самоконтрящуюся a nut of a bolt of fastening of the bottom support of the shock-absorber.
4. The further installation is made in an order, the return to an order of dismantle of components.
5. In summary drive away the car on a car repair shop for check and adjustment of corners of installation of back wheels.


On the main page