| 1. Remove belts and a pulley коленвала. |
|
|
2. Define depth запрессовки an epiploon, then cautiously get an epiploon from the case of the oil pump, having hooked a screw-driver or the special tool. |
| 3. Clear an aperture under an epiploon in the case of the oil pump and slightly grease an external surface and working edges of a new epiploon with oil for the engine. |
|
4. Cautiously without warps запрессуйте a new epiploon into place with the help оправки with a diameter a bit smaller, than diameter of an epiploon. After installation be convinced that position of a spring of an epiploon is not broken. |
| 5. Establish other details upside-down. |