Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
- 8. Brake system
   8.1. Specifications
   8.2. ABS-system
   8.3. Колодки disk brakes
   8.4. A brake support
   8.5. A brake disk
   8.6. Колодки drum-type brakes
   8.7. The wheel cylinder of back brakes
   8.8. The main cylinder of brakes
   8.9. Hoses and hydrodrive tubes
   8.10. A pressure regulator
   8.11. A manual brake
   8.12. Cables of a manual brake
   8.13. The vacuum amplifier of brakes
   8.14. Prorolling of brakes
   8.15. Adjustment of a pedal of a brake
   8.16. The switch of a signal of braking
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes





8.12. Cables of a manual brake
THE GENERAL DATA

Cable arm on a bridge beam

The cable arm on a bridge beam – is specified by an arrow.

Cable arms on a frame

Cable arms on a frame – are specified by arrows.

Скоба cable fastenings

Скоба cable fastenings – it is specified by an arrow.

Replacement

PERFORMANCE ORDER
1. Release a manual brake. Lift the car and remove wheels.
2. Loosen the a cable, having turned away a nut.
3. Disconnect a cable from a regulator crank.
5. The cable is established upside-down. Adjust a manual brake.
4. Get a cable from arms, get скобы.
5. The cable is established upside-down. Adjust a manual brake.

On the main page