Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
- 8. Brake system
   8.1. Specifications
   8.2. ABS-system
   8.3. Колодки disk brakes
   8.4. A brake support
   8.5. A brake disk
   8.6. Колодки drum-type brakes
   8.7. The wheel cylinder of back brakes
   8.8. The main cylinder of brakes
   8.9. Hoses and hydrodrive tubes
   8.10. A pressure regulator
   8.11. A manual brake
   8.12. Cables of a manual brake
   8.13. The vacuum amplifier of brakes
   8.14. Prorolling of brakes
   8.15. Adjustment of a pedal of a brake
   8.16. The switch of a signal of braking
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

8.4. A brake support

The prevention

At serious damages it is recommended to replace a support.


1. Release nuts of wheels, lift the car and establish on supports. Remove wheels.
2. Remove about 2/3 liquids from a tank (to exclude transfusion at cultivation колодок). Clear a support and adjoining details.
3. If the support varies, turn away a nut of the union of a hydrodrive (union bolts are specified by arrows).
4. Turn away bolts and remove a support. If in a disk the fillet because of development preliminary remove Pads was formed.
5. Replace a support at detection of traces of a leak.
6. Assemblage is carried out upside-down. Support bolts tighten with the set moment. Remove air from a hydrodrive (if understood).

On the main page