Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
- 8. Brake system
   8.1. Specifications
   8.2. ABS-system
   8.3. Колодки disk brakes
   8.4. A brake support
   8.5. A brake disk
   8.6. Колодки drum-type brakes
   8.7. The wheel cylinder of back brakes
   8.8. The main cylinder of brakes
   8.9. Hoses and hydrodrive tubes
   8.10. A pressure regulator
   8.11. A manual brake
   8.12. Cables of a manual brake
   8.13. The vacuum amplifier of brakes
   8.14. Prorolling of brakes
   8.15. Adjustment of a pedal of a brake
   8.16. The switch of a signal of braking
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes





8.7. The wheel cylinder of back brakes
THE GENERAL DATA

The prevention

Cylinders vary only in steam on an axis, to change them separately it is forbidden.


Removal and installation

PERFORMANCE ORDER
1. Remove drums and Pads.
2. Turn away the union of a tube of a hydrodrive, muffle a tube and an aperture in the cylinder (And – the union of a tube of a brake, In – bolts of the wheel cylinder).
3. Turn away bolts and remove the cylinder.
4. Installation is carried out upside-down. Pump over a hydrodrive of brakes and remove air.

On the main page