Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. A suspension bracket and a steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. The stabilizer of a forward suspension bracket
   9.4. A rotary fist
   9.5. A forward nave and the bearing
   9.6. Spherical support
   9.7. The top lever
   9.8. The bottom lever
   9.9. Back shock-absorbers
   9.10. The back stabilizer of cross-section stability
   9.11. A cross-section bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. A steering wheel
   9.15. A tip of steering draughts
   9.16. A cover of the steering mechanism
   9.17. The steering mechanism
   9.18. The hydraulic booster pump
   9.19. The wheel hydraulic booster
   9.20. Corners of installation of forward wheels
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes





9.8. The bottom lever
THE GENERAL DATA

The bottom lever of a suspension bracket of the car "Toyota 4-Runner/Hilux/Surf"

1. The back clown
2. The buffer 2
3. The lever
4. The buffer 1
5. The forward clown

Removal and installation

PERFORMANCE ORDER
1. Lift redock of the car and remove wheels.
2. Remove the steering mechanism (subsection 9.17 see).
3. Disconnect from the bottom lever a suspension bracket rack.
4. Remove draught of the stabilizer and a plug collar near to the removed lever.
5. Designate position of adjusting clowns.
6. Turn away a nut and bolts of axes.
7. Remove the lever.
8. Installation is carried out upside-down.
9. At assemblage establish clowns on the labels put at dismantling.
10. Bolts and nuts of an axis of the lever definitively tighten after car lowering.

On the main page