Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. A suspension bracket and a steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. The stabilizer of a forward suspension bracket
   9.4. A rotary fist
   9.5. A forward nave and the bearing
   9.6. Spherical support
   9.7. The top lever
   9.8. The bottom lever
   9.9. Back shock-absorbers
   9.10. The back stabilizer of cross-section stability
   9.11. A cross-section bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. A steering wheel
   9.15. A tip of steering draughts
   9.16. A cover of the steering mechanism
   9.17. The steering mechanism
   9.18. The hydraulic booster pump
   9.19. The wheel hydraulic booster
   9.20. Corners of installation of forward wheels
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

9.18. The hydraulic booster pump

THE GENERAL DATA

The pump of the hydraulic booster of the 4-cylinder engine

1. The pump
2. A vacuum hose
3. A return hose
4. A bolt of fastening of the union
5. A pressure head tube
6. A lining
7. A belt
8. An intermediate pulley
9. An adjusting bolt

The pump of the hydraulic booster of engine V6

1. The pump
2. A belt
3. A return hose
4. A bolt of fastening of the union
5. A pressure head tube
6. The pressure gauge
7. A socket

Removal and installation

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Remove a pump belt.

3. Remove a collar and disconnect from the pump a return hose.

4. Turn away a bolt of the ring union and disconnect a pressure head tube.

5. If the pump varies, it is recommended to remove a pulley.

6. Fix a pulley, turn away a nut and remove a pulley.

7. Turn away bolts (nuts) and cautiously remove the pump.

8. Installation is carried out upside-down.

9. Remove air from the hydraulic booster.

On the main page