Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. A suspension bracket and a steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. The stabilizer of a forward suspension bracket
   9.4. A rotary fist
   9.5. A forward nave and the bearing
   9.6. Spherical support
   9.7. The top lever
   9.8. The bottom lever
   9.9. Back shock-absorbers
   9.10. The back stabilizer of cross-section stability
   9.11. A cross-section bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. A steering wheel
   9.15. A tip of steering draughts
   9.16. A cover of the steering mechanism
   9.17. The steering mechanism
   9.18. The hydraulic booster pump
   9.19. The wheel hydraulic booster
   9.20. Corners of installation of forward wheels
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

9.9. Back shock-absorbers
THE GENERAL DATA

Details of fastening of the back shock-absorber

1. Washers

2. Pillows

3. The shock-absorber

4. Plugs

Removal and installation

PERFORMANCE ORDER
1. Lift a back part of the car, having substituted supports under a bridge beam, and remove wheels.
2. Disconnect the bottom fastenings (are specified by arrows) shock-absorbers.
3. Turn away a nut of the top fastening (it is specified by an arrow). For this purpose a nut fix a key, and rotate the shock-absorber.
4. Installation is carried out upside-down.
5. Track correctness of installation of details.


On the main page