Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. A suspension bracket and a steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. The stabilizer of a forward suspension bracket
   9.4. A rotary fist
   9.5. A forward nave and the bearing
   9.6. Spherical support
   9.7. The top lever
   9.8. The bottom lever
   9.9. Back shock-absorbers
   9.10. The back stabilizer of cross-section stability
   9.11. A cross-section bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. A steering wheel
   9.15. A tip of steering draughts
   9.16. A cover of the steering mechanism
   9.17. The steering mechanism
   9.18. The hydraulic booster pump
   9.19. The wheel hydraulic booster
   9.20. Corners of installation of forward wheels
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes





9.19. The wheel hydraulic booster
THE GENERAL DATA

To delete air from a wheel hydrodrive it is necessary at any dismantling of a highway, irrespective of those measures, which have been accepted to prevent air hit.

Air removal

PERFORMANCE ORDER
1. Expose wheels in driving position on a straight line.
2. Check up liquid level, if necessary restore, having added to label Cold on probeе a tank.
3. Start the engine and translate in an operating mode on fast single to a course.
4. Check up liquid level.
5. Turn wheels in both parties against the stop, without supposing blow about the terminator.
6. Check up and restore liquid level.
7. Return wheels in driving position on a straight line.
8. After some minutes stop the engine.
9. Check up level of a liquid which on the heated-up engine should be on mark Hot.
10. If necessary add.

On the main page