Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
- 9. A suspension bracket and a steering
   9.1. Specifications
   9.2. Springs and shock-absorbers (racks) of a forward suspension bracket
   9.3. The stabilizer of a forward suspension bracket
   9.4. A rotary fist
   9.5. A forward nave and the bearing
   9.6. Spherical support
   9.7. The top lever
   9.8. The bottom lever
   9.9. Back shock-absorbers
   9.10. The back stabilizer of cross-section stability
   9.11. A cross-section bar of the back bridge
   9.12. Back springs
   9.13. Longitudinal bars of the back bridge
   9.14. A steering wheel
   9.15. A tip of steering draughts
   9.16. A cover of the steering mechanism
   9.17. The steering mechanism
   9.18. The hydraulic booster pump
   9.19. The wheel hydraulic booster
   9.20. Corners of installation of forward wheels
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes





9.3. The stabilizer of a forward suspension bracket

Removal and installation

PERFORMANCE ORDER
1. Lift car redock.
2. Turn away a nut (are specified by arrows) draughts of the stabilizer.
3. Turn away bolts (nuts) (are specified by arrows) collars of plugs.
4. Remove the stabilizer.
5. Remove stabilizer plugs.
6. Check up a condition of the plugs, the damaged plugs replace.
7. Cuts on new plugs at assemblage should be turned towards a forward part of the car.
8. Assemblage is carried out upside-down.

On the main page