Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
- 3. Maintenance service
   - 3.1. Maintenance service of cars with petrol engines
      3.1.1. Operational materials and liquids
      3.1.2. Refuelling capacities
      - 3.1.3. Periodicity of service
         - Each 15 000 km
   Replacement of oil and the oil filter
   Replacement of spark plugs
   Check of tightness of hoses and вытекания liquids
   Check and replacement auxiliary drivers belts
   Check of system of ignition
   Adjustment of turns of idling and quality of a mix
   Clearing of the filter of the fuel pump on models with the carburettor
   Level check трансмиссионной liquids
   Check of a condition of oil
   Electroconducting check
   Check brake колодок and a brake disk
   Adjustment of a manual brake
   Exhaust system check
         + Each 30 000 km
         + Each two years
         + Each 60 000 km
   + 3.2. Maintenance service of cars with diesel engines
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes Clearing of the filter of the fuel pump on models with the carburettor

The prevention

Gasoline extremely fire - also is explosive, therefore it is necessary to show care at work on any part of fuel system.

Works on fuel system are necessary for making in well aired premise for what it is possible to open all windows and doors for draught creation.

At work with fuel system observe cleanliness as the dirt which has got to channels of fuel system, can block them that will break normal work of the engine.

On some models the fuel pump of not folding type and this operation there is no necessity to carry out.

1. Arrange pure rags under the fuel pump.
2. Unscrew the screw and remove a face cover from the fuel pump. Remove a rubber sealing ring.
3. Remove from a cover the filter and wash out it in pure fuel. Check up a filter condition on presence of pollution or ruptures and, if necessary, replace it.
4. Arrange the filter in a cover and establish rubber consolidation.
5. Establish a cover on the pump and fix its screw.
6. Start the engine and check up tightness and fuel system.

On the main page