Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   - 4.5. Diesel engines of 1,7 l
      4.5.1. A technical characteristics
      4.5.2. A method of removal of the engine
      4.5.3. Engine repair
      4.5.4. Replacement of engine oil and the oil filter
      + 4.5.5. Check, removal, installation and adjustment of a gear belt
      4.5.6. Check and adjustment timing
      4.5.7. Removal and installation of a head of the block of cylinders
      4.5.8. Removal and camshaft installation
      4.5.9. Removal and installation of the oil pallet
      4.5.10. Removal and installation of the oil pump
      4.5.11. Removal and installation перепускного the valve
      4.5.12. Removal and installation of the water pump
      4.5.13. Removal, check and thermostat installation
      4.5.14. Removal and installation of pistons and rods
      4.5.15. Removal and flywheel installation
      4.5.16. Replacement of sealing rings
      4.5.17. Replacement of support of the power unit
      4.5.18. Engine removal
      4.5.19. Engine repair
      4.5.20. Removal, repair and assemblage of the oil pump
      + 4.5.21. A head of the block of cylinders
      4.5.22. Check of elements of the engine
      4.5.23. Engine installation
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





4.5.10. Removal and installation of the oil pump
THE GENERAL DATA

Arrangement of bolts of fastening of the oil pump on the engine of 1,7 l

Screws of fastening of the oil pump are specified by arrows.

Removal

PERFORMANCE ORDER
1. Remove the oil pallet.
2. Remove the oil filter and disconnect an electric socket from the switch of a control lamp of pressure of oil.
3. Establish the piston of the first cylinder in ВМТ and ослабьте a tension.
4. Unscrew the central bolt of a pulley of an auxiliary belt and a pulley of a gear belt of a cranked shaft. Remove a pulley of an auxiliary belt and a pulley of a gear belt. Remove segment шпонку.
5. Remove an intermediate pulley of an auxiliary belt.
6. Remove a back casing of a gear belt.
7. Unscrew bolts of fastening of the oil pump.
8. Remove the oil pump together with маслозаборной a tube. Remove a lining and disconnect маслозаборную a tube from the pump.

Installation

PERFORMANCE ORDER
1. Grease a sealing ring of a cranked shaft.
2. Establish the oil pump, using a new lining. Insert and tighten bolts of fastening of the pump.
3. Establish маслозаборную a tube, using a new sealing ring.
4. The further installation is made in sequence, return to removal.

On the main page